육로 수송 안정성 확보를 위한 차량 전복 위험성 분석 방법론 연구

전진원¹^{, *} ; 김만수² ; 남궁영수³ ; 김진홍¹ ; 경수민³

1LIG넥스원 미래전장IPS연구소 선임연구원
2LIG넥스원 미래전장IPS연구소 수석연구원
3LIG넥스원 미래전장IPS연구소 연구원

A Study on Rollover Risk Analysis Methodology for Ensuring Road Transport Safety of Military Vehicles

Jinwon Jeon¹^{, *} ; Mansoo Kim² ; Youngsoo Namgoong³ ; Jinhong Kim¹ ; Sumin Kyung³

1Research engineer, Future Warfare Integrated Product Support R&D Lab, LIG Nex1
2Chief research engineer, Future Warfare Integrated Product Support R&D Lab, LIG Nex1
3Research engineer, Future Warfare Integrated Product Support R&D Lab, LIG Nex1

Correspondence to: ^*Jinwon Jeon Future Warfare Integrated Product Support R&D Lab, LIG Nex1 20, Daewangpangyo-ro 851beon-gil, Sujeong-gu, Seongnam-si, Gyeonggi-do, 13449, Republic of Korea E-mail: jinwon.jeon@lignex1.com

초록

차량을 이용한 무기체계 육로 수송 중 발생하는 전복 사고는 임무 수행에 심각한 차질을 초래하며, 인명 및 장비 손실을 초래할 수 있다. 본 연구는 차량 속도, 무게중심, 도로 경사, 적재량 등의 주요 원인 변수를 식별하여 전복 위험성을 평가하기 위한 체계적인 방법론을 제안한다. 시뮬레이션 기법을 활용한 안정성 평가방법을 구축하였으며, 시나리오 기반 실험을 통해 그 효과를 검증하였다. 제안된 방법론은 군용차량 수송 안전성 향상에 기여할 수 있을 것으로 기대된다.

Abstract

Rollover accidents that occur during the land transport of weapon systems using military vehicles can cause significant disruption to mission execution and result in the loss of personnel and equipment. This study proposes a systematic methodology for assessing rollover risk by identifying key causal factors such as vehicle speed, center of gravity, road slope, and payload. A stability assessment method was developed using simulation techniques, and its effectiveness was validated through scenario-based experiments. The proposed methodology is expected to contribute to improving the safety of military vehicle transport operations.

Keywords:

Military Vehicle, Transport Safety, Rollover Risk, Lateral Load Transfer Ratio, Simulation-based Evaluation

키워드:

군용 차량, 수송 안전성, 전복위험성, 횡하중전이비, 시뮬레이션 기반 평가

Acknowledgments

이 논문은 2025년도 한국해군과학기술학회 하계학술대회 발표 논문임.

본 연구는 한국자동차연구원 플랫폼안전기술부문과 협업으로 수행된 연구결과임.

References

TruckSim v2016.1 한국총판 ㈜신호시스템, https://www.ishinho.com/?page_id=2000
Xiaotong Dong, Yi Jiang, Zhou Zhong, Wei Zeng, “Rollover Threshold Investigation of a Heavy-duty Vehicle During Cornering Based on Multi-body Dynamics,” Sage, Journals Advances in Mechanical Engineering, Vol. 10, No. 7, pp. 1–13, 2018. [https://doi.org/10.1177/1687814018789505]
Lee, S., Cho, H., Nam, K. “Dynamic Modeling and Control of a 4-Wheel Narrow Tilting Vehicle,” Actuators, 2024, Vol. 13, No. 6, 210. [https://doi.org/10.3390/act13060210]
ISO 16333: 2011, Heavy Commercial Vehicles and Buses — Steady-state Rollover Threshold — Tilt-table Test Method.
ISO 3888-1: 2018, Passenger Cars — Test Track for a Severe Lane-change Manoeuvre Part 1: Double Lane-change.
ISO 7401: 2011, Road Vehicles — Lateral Transient Response Test Methods — Open-loop Test Methods.