
EMC 설계 대책과 항공전자 시험장비 적용에 대한 유효성 검증
Ⓒ 2026 Korea Society for Naval Science & Technology
초록
항공기 안전에 있어 항공전자 장비는 국방 및 민간 부문 모두에서 별도의 EMC 규정이 제정되어 검증되어 왔으며, 현재도 지속적으로 개정되고 있다. 이러한 규정을 검증하기 위해 EMC 시험은 항공전자 장비와 이를 구동하는 시험장비로 구성되어진다. 대부분의 항공전자 장비는 EMC를 고려한 설계를 적용하지만 시험장비에 대해서는 이러한 중요성이 간과되어진다. 본 논문에서는 EMC 설계 방법을 시험장비에 적용하고 그 영향과 효율성을 설명하고자 한다.
Abstract
The Eletromagnetic Compatibility (EMC) verification of avionics equipment is directly related to aircraft safety. Due to this importance, EMC regulations for aircraft have been established and continuously revised in both the defense and civilian sectors. EMC testing to verify these regulations requires avionics equipment and the test equipment used for testing. However, although most avionics equipment are designed considering its EMC immunity, the impact and importance of the test equipment in EMC testing has been ignored. This study applies EMC design techniques to this test equipment to clarify its impact and effectiveness.
Keywords:
EMC Test, MIL-STD-461, Aviation Electronics, Test Equipment, EWC키워드:
전자파 적합성 시험, 군사용 전자파적합성 시험규격, 항공전자, 시험장비, 전자전 컴퓨터Acknowledgments
이 논문은 2026년도 한국해군과학기술학회 하계학술대회 발표 논문임.
References
- MIL-STD-461F Interface Standard: Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment, December 2007.
- MIL-STD-15533B Military Standard Published by the United States Department of Defense That Defines the Mechanical, Electrical, and Functional Characteristics of a Serial Data Bus, 1978.
-
Jaegi Hong, Wonyoung Shin, Seoungmok Lee, Hyunchul Jo, & Sinyoung Kim, ‘Development of Test Equipment for Electronic Warfare Computer (EWC) Verification,’ Journal of the KIMST, 2024, VOL. 27, NO. 6, pp. 3-5.
[https://doi.org/10.9766/KIMST.2024.27.6.737]
- Jack Black, ‘EMC and Aerospace,’ In Compiance, 2010.
- Eunkyung Ko, Seonghun Kim, Seungyeol Yang, & Hyeongjin Kim, ‘System Integration Test of Aircraft Electronic Equipments Using Simulator in the Laboratory,’ in Proceedings of KSAS Fall Conference, November 2015, pp. 1147-1150.
- DO-160, RTCA, Environmental Conditions and Test Procedures for Airbone Equipment, 1975.