한국해군과학기술학회
[ Article ]
Journal of the KNST - Vol. 9, No. 3, pp.783-786
ISSN: 2635-4926 (Print)
Print publication date 30 Sep 2026
Received 13 Aug 2026 Revised 31 Aug 2026 Accepted 20 Sep 2026
DOI: https://doi.org/10.31818/JKNST.2026.9.9.3.783

적외선 검출기 적분시간에 따른 불균일 보정 계수 활용 방안

박성현1, * ; 유연덕1 ; 박정우1 ; 박진호2 ; 하창수3
1LIG D&A 선임연구원
2LIG D&A 수석연구원
3국방과학연구소 선임연구원
Utilization of Non-Uniformity Correction Coefficients According to the Integration Time of a Detector
Sunghyun Park1, * ; Yeondeok Yoo1 ; Jeongwoo Park1 ; Jin-Ho Park2 ; Chang-Soo Ha3
1Research engineer, LIG D&A
2Chief research engineer, LIG D&A
3Senior researcher, Agency for Defense Development

Correspondence to: *Sunghyun Park Tel: +82-31-326-9013 E-mail: sunghyun.park@ligdna.com

Ⓒ 2026 Korea Society for Naval Science & Technology

초록

본 논문에서는 검출기의 적분시간(integration time)에 따른 불균일 보정(non-uniformity correction) 계수 활용 방안을 연구하였다. 적외선 검출기는 적분시간에 따라 반응도 및 출력 특성이 변화하므로, 적분시간에 맞는 불균일 보정 계수를 적용해야 한다. 영상 품질 향상을 위해서는 많은 수의 보정 계수가 필요하다. 그러나 메모리 용량이 제한되어 있어 저장 가능한 보정 계수의 수가 제한될 수밖에 없다. 이에 본 논문에서는 다양한 적분시간에서 특정 적분시간에 대해 획득한 불균일 보정 계수를 다른 적분시간에 활용하는 방안을 제안하였다.

Abstract

This study investigates a method for utilizing non-uniformity correction (NUC) coefficients of an infrared detector according to its integration time. Since the responsivity and output characteristics of infrared detectors vary based on integration time, different NUC coefficients are generally required for each integration time. However, memory capacity is limited, which restricts the number of NUC coefficients that can be stored and utilized. This study proposes a method for applying NUC coefficients obtained at a specific integration time to other integration time ranges.

Keywords:

Detector, Non-Uniformity Correction, Infrared System, Memory, NETD

키워드:

검출기, 적외선 시스템, 메모리, 등가잡음온도차

Acknowledgments

이 논문은 2026년 정부(방위사업청)의 재원으로 국방과학연구소의 지원을 받아 수행된 연구임.

References