통합체계지원에서의 체계지원분석 적용 방안

서양우¹^{, *} ; 김현서² ; 김성범² ; 최우식²

1LIG넥스원 PGM IPS연구소 수석연구원
2LIG넥스원 PGM IPS연구소 연구원

Study on the Application of Product Support Analysis in Integrated Product Support

Yangwoo Seo¹^{, *} ; Hyeonseo Kim² ; Seongbum Kim² ; Wooshik Choi²

1Chief research engineer, PGM Integrated Product Support R&D Lab, LIG Nex1
2Research engineer, PGM Integrated Product Support R&D Lab, LIG Nex1

Correspondence to: ^*Yangwoo Seo PGM Integrated Product Support R&D Lab, LIG Nex1, 255, Pangyo-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, Republic of Korea Tel: +82-31-326-9255 Fax: +82-31-326-9001 E-mail: yangwoo.seo2@lignex1.com

초록

체계지원분석은 최적의 체계지원 요소를 식별하여 구체화하는 활동이다. 이때 시스템 공학 기법을 적용한 수명주기관리계획서를 관리하여야 한다. 본 논문은 통합체계지원에서의 체계지원분석 적용 방안을 제시하였다. 체계지원분석 사례 적용 시 상용 컴퓨터를 설정하였다. 우선, 상용 컴퓨터의 일반 분해 목록을 작성하여 체계지원분석의 기초자료를 수집하였다. 이후 군수지원분석 계통도, 고장 유형 영향 및 치명도 분석, 신뢰성 중심 정비 분석, 정비업무분석, RAM matrix 및 군수지원분석 요약자료를 작성하였다. 또한, 체계지원분석의 개선된 프로세스를 제시하였다.

Abstract

Product support analysis is an activity that identifies and shapes up the optimal product support elements. At this time, the life cycle management plan applying systems engineering should be managed. This paper presented a method of applying product support analysis in integrated product support. A case of product support analysis was applied to a commercial computer. First, a general breakdown list of a commercial computer was prepared to collect basic data for product support analysis. After that, logistic support analysis control number family tree, failure mode effects and criticality analysis, reliability centered maintenance, maintenance task analysis, RAM matrix and logistic support analysis summary were prepared. Also, an improvement process for product support analysis was presented.

Keywords:

Capability, Integrated Product Support, Product Support Analysis, Total Life Cycle System Management, Systems Engineering

키워드:

능력, 통합체계지원, 체계지원분석, 총수명주기관리, 시스템 공학

References

DoD Annual Report, “Performance of the Defense Acquisition System,” Under Secretary of Defense, Acquisition, Technology and Logistics, Department of Defense, p. 13, 2016.
DoD Directive 5000.01, “The Defense Acquisition System,” Under Secretary of Defense for Acquisition and Sustainment, Department of Defense, p. 4, 2020.
ROK MND Instruction No. 2779, “Total Life Cycle System Management,” ROK Ministry of National Defense, p. 9, 2023.
Army Regulation 700-127, “Logistics, Integrated Product Support,” Headquarters Department of the Army, pp. 55-56, 2018.
DoD Instruction 5000.91, “Product Support Management for the Adaptive Acquisition Framework,” Under Secretary of Defense for Acquisition and Sustainment, Department of Defense, Section 4: General Product Support Procedures over the Program’s Life Cycle, p. 4, 2021.
DoD Instruction 5000.02, “Operation of the Defense Acquisition System,” Under Secretary of Defense for Acquisition, Technology and Logistics, Department of Defense, pp. 87-94, 2017.
DAPA Manual 2021-7, “Product Support Analysis Work for Weapons System,” Defense Acquisition Program Administration, p. 5, 2021.
MIL HDBK 502A, “Product Support Analysis,” Department of Defense, pp. 5-46, 2013.
TA STD 0017, “Product Support Analysis,” TechAmerica Standards & Technology Department, pp. 5-46, 2012.
MIL STD 1629A, “Procedures for Performing a Failure Mode, Effects and Criticality Analysis,” Department of Defense, Task 101: Failure Mode and Effects Analysis, pp. 1-8, 1980.
MIL HDBK 2173, “Handbook for Reliability Centered Maintenance Requirements for Naval Aircraft, Weapons Systems and Support Equipment,” Department of Defense, pp. 15-30, 1998.
MIL STD 470, “Maintainability Program for Systems and Equipment,” Department of Defense, pp. 27-37, 1989.